SPECIALLY DESIGNED FOR 3/4-CYLINDER ENGINES
Fully Compatible Performance Kit
Important Warnings
- 1. Regulator and injector selection is optional.
- 2. Super Regulator should be selected for engines producing over 150 HP.
- 3. Injectors must be selected based on whether the engine has 3 or 4 cylinders.
SPECIALLY DESIGNED FOR 5/6-CYLINDER ENGINES
Fully Compatible Performance Kit
Important Warnings
- 1. Regulator and injector selection is optional.
- 2. Super Regulator should be selected for engines producing over 150 HP.
- 3. Injectors must be selected based on whether the engine has 5 or 6 cylinders.
SPECIALLY DESIGNED FOR 8-CYLINDER ENGINES
Fully Compatible Performance Kit
Important Warnings
- 1. Regulator and injector selection is optional.
- 2. Super Regulator should be selected for engines producing over 150 HP.
- 3. Injectors must be selected based on whether the engine has 8 cylinders.
MIC KITS
A World First!
Bring next-generation technology to your classic vehicles with the MIC Series!
Convert conventional carburetor, mechanical injection, or single-point injection vehicles to sequential LPG technology with CanGas's patented MIC 24 and MIC 28 kit systems.
- Higher fuel efficiency and increased savings
- Optimized fuel delivery for better performance and economy
- Patented technology engineered for maximum compatibility
MIC KITS
Advanced Electronic Control Unit and Features
Converts carbureted, single-point injection, and mechanical injection vehicles to a multi-point injection system
10-15% better fuel economy compared to mechanical carburetor systems
100% performance under load thanks to correct air-fuel mixture
Extra fuel savings with "Cut-Off" - cuts fuel when the driver releases the accelerator
All load and RPM zones can be adjusted individually with computer support
Precise and accurate mixture tuning thanks to the sensitive MAP sensor
Can also operate as a gasoline ECU
Fast and easy installation
Patented high technology
A world first!
Carburetor empty/fill mode for switching between LPG/CNG and gasoline
No performance loss at high altitudes
Dedicated calibration scenarios for injected and carbureted vehicles
Eliminates backfire caused by fuel accumulation in the manifold
Flexible regulator and injector options based on engine power and cylinder count
Protected against overvoltage and overcurrent
Fully compatible with carbureted, single-point injection, K-jetronic, and mechanical injection vehicles
Available for 3/4-cylinder engines
MIC KITS
MIC MINI KIT
- MIC ECU
- MIC ECU WIRING HARNESS
- DIGITAL MAP SENSOR
- RGB SEQUENTIAL SWITCH
Most Popular
MIC FULL KIT
- MIC ECU
- MIC ECU WIRING HARNESS
- DIGITAL MAP SENSOR
- RGB SEQUENTIAL SWITCH
- FUSE HOLDER AND FUSE
- AT09 REGULATOR
- 2 OHM 4-CYLINDER INJECTOR
- MICRO FILTER
- 16X23 WATER HOSE
- 12X18 LPG HOSE
- 5X11 INJECTOR HOSE
- 5X11 MAP HOSE
- METAL WATER TEE
- 16X25 WATER HOSE CLAMP
- 12X18 LPG HOSE CLAMP
- 9X11 WIRE CLAMP
- SUPER MULTIVALVE (Coil & Sensor & Cables Included)
- MINI BLOCK FOR CYLINDER MULTIVALVE
- FILLING NOZZLE - STANDARD
- 8MM COPPER PIPE
MIC MIDI KIT
- MIC ECU
- MIC ECU WIRING HARNESS
- DIGITAL MAP SENSOR
- RGB SEQUENTIAL SWITCH
- FUSE HOLDER AND FUSE
- AT09 REGULATOR
- 2 OHM 4-CYLINDER INJECTOR
- MICRO FILTER
- SUPER MULTIVALVE (Coil & Sensor & Cables Included)
- FILLING NOZZLE - STANDARD
- 8MM COPPER PIPE
Quality Guarantee
Technical Support
